Skip to main content

installation guide of 7.003 K-tag 2.13 KTM100 Software

latest K-tag ecu programmer firmware have be updated 7.003 Ktag version,  7.003 ktag hardware can working on 2.13 K-suite / 2.13 KTM100 software, New KTM100 software is much better than ordinary K-suite software, here, vipprogrammer.com will share  installation instruction of 2.13 KTM100 Software, and guide you how to install 2.13 K-suite / 2.13 KTM100 software on your laptop correctly.

Software Version: Ktag KTM100 V2.13

Firmware: V7.003

Ktag KTM100 V2.13 Support  vehicle list:

www.obd2tek.com/obd2tuning/Ktag%202.13%20Ktag%20firmware%20V7.003%20Ktag%20KTM100%20V2.13/Ktag 2.13 Ktag firmware V7.003 Ktag KTM100 V2.13 Support vehicle list.xlsx

Ktag 2.13 Ktag Firmware V7.003 software Ktag KTM100 V2.13 installation:

1). Install KTAG KTM100 V2.13 setup:

Open KTM100 setup in the CD software on My computer


Open KTM100 file, then open KTM100 English file (1st file).

Open KTAG KTM100 setup and install Microsoft Visual C++2005.


Install Adobe Reader 7.0.8.



Confirm Setup settings and copy file to Local Disk C automatically.


2). Install K-tag KTM100 V2.13 driver

Open Driver folder on KTM100 folder and install it.


Select Driver language.

Click Next.

Click Next in Read Me File window

Press Next to start installation.

Driver installation is completed, press Finish button.


3) Connect ktag 2.13 with ktag firmware V7.003 from obd2tuning.com.

Connect the K-TAG ECU programmer with vehicle and wait the system to find the hardware driver and install it.


Open My Computer>>Manager>>Device Manager>>Universal Serial Bus controllers>>DimSport-New Trasdata Device to check and make sure there is good communication between K-tag and computer.

4) Run obd2tuning.com Ktag KTM100 V2.13 software.

Open KTM100 software on the desktop.

Press OK when system display an message “Error during the server .connection” to continue.

Select Options tab to choose the language you want.



Check vehicle and ECU type list on Info Plugins tab.


Select certain ECU brand and tick Checksum Info button on the bottom, another window will bring the checksum information.


Select Interface tab, and select vehicle make, model, engine and year information. Here is example of program VW Bosch EDC17 ECU. Then press ID button, confirm you have selected the correct connection mode.



Then the ECU information will fully displayed on the REPORT column.

Select read/write ECU via Micro, EEPROM etc on OPERATION part, click on Read.


After complete read ECU, save your file to a certain folder.



Check ECU plugin and tick Manual icon to view detail plugin.

Comments

Post a Comment

Popular posts from this blog

Complete Guide to Replacing Your iPhone Battery at Home

  Has your iPhone battery started showing the dreaded signs of age, like frequent charging, rapid draining, or even an untimely shutdown? Are you considering a battery replacement but feeling deterred by the potential cost or hassle of a trip to the Apple Store? Don't worry; with the right guidance, you can replace your iPhone battery at home quickly and safely, sparing your wallet and ensuring a future of longer charge cycles for your beloved device. Whether you have the latest model or an older version, we'll walk you through the process step by step. But before we get into the nitty-gritty, here's why a battery replacement might be in your best interest. Why You Should Replace Your iPhone Battery The lithium-ion batteries in our smartphones are not immortal. They degrade over time due to a variety of factors, such as age, temperature, and the number of charge cycles. Replacing an old battery can provide several benefits: Improved Performance: A new battery can result ...
Post a Comment
Read more

User Manual: JC V1 Programmer to fix iPhone light sensor/vibrator

As we know, the light sensor and vibrator is very important for iPhone screen. If you want to replace the iPhone screen, you also need to transfer the original screen data to the new iPhone screen(iPhone 8 to iPhone Xs Max),so you can make sure the new iPhone screen will work fine. Here is a  JC V1 programmer  to fix iPhone light sensor and vibrator problem (for iPhone 7- iPhone Xs Max), it also can repair iPhone baseband eeprom IC or iPhone logic eeprom IC problem. The JC V1 Programmer comes with 24-inch HD display screen, three-color LED indicator light, two small connecting seats (for connecting function panel) , two buttons and one function panel (including light sensor/touch connector, baseband function connector, vibration connector) It support 2 languages (Chinese/English) and three lines of code (read/write/burn/save), the function panel can be changed, the software can automatically update What’s the functions? - Repair iPhone Light sensor/ true ...
1 comment
Read more

Here: JC P11 iPhone Nand Test Fixture Specification Details

JC P11 iPhone Nand test fixture is on sale now, some users still confused for it, what's credit points for JC P11? Why it's cheap? As we know, JC P11 BGA110 programmer is the latest programmer for iPhone   iPhone XS Max,XS, X, 8P, 8  and iPhone 11 Pro max/pro/11, which is made by JCID factory.  Here are some  specification details for JC P11 programmer . 1. Main Functions. - Support to modify and write BGA110 NAND SYSCFG data (NAND Flash underlying data, such as SN/BT/WIFI and others); Unbind WIFI. - It doesn't require restoring the firmware for brand-new Nand flash, the SYSCFG data can be written directly. - Repair the Error 35 during firmware restoring for BGA110 NAND - Repair the DATA Error for BGA110 NAND - Support iPhone 8/8P/X/XS/XS Max currently, free software upgrade to support 11-11Pro Max in the future - Initiate the network charging mode, can purchase the points according to the demand, which greatly saves the equipmen...
Post a Comment
Read more