Your Guide to Local iPhone Repair Services

This iPhone 6 dropped into water, we picked it up as soon as we can, but the iPhone 6 still was damaged, it won't turn on.  When we press the iPhone power button, the iPhone 6 just keep black screen, it doesn't respond. We need to solve this problem. Use screwdrivers to remove the 2 screws that next to the iPhone lightning port, and the put iPhone on the CPB screen separator .  After a while, we can open the iPhone screen and remove it. Disconnect the iPhone battery, and then measure the iPhone motherboard with DC power supply, trigger it, the boot current stuck on 510mA, which is abnormal. Remove the iPhone display assembly and take out the iPhone motherboard. Put iPhone motherboard under the microscope to observe, we can see that there are many moldy traces on the motherboard. Clean up the iPhone motherboard with PCB cleaner, and then connect the iPhone battery with DC power supply , use tweezers to power up, the boot current stuck on 220mA, which is still abnormal. ...

After the iPhone 7 Plus is turned on, enter the password to enter the system, everything is normal. Then lock the iPhone, and use touch ID, but it's failed to work, the iPhone 7 Plus touch ID function is unavailable, how to fix it? As we know, touch ID function very important for iPhone, it makes the iPhone safer and it's very convenient. Both software and hardware problem can cause this failure, in this article, we are going to share some software solutions. Solution 1. Make sure the finger is clean and dry If the finger is dusty, clutter, or liquid, it will prevent the iPhone from identifying your fingerprints, which can cause touch ID failure. When you touch the iPhone 7 Plus home button with your fingers, please make sure your finger is clean and dry, so it can make the touch ID work normally. You can wipe your fingers with a clean cloth , make it clean and dry. Solution 2: Make sure the iPhone home button is clean and dry If the iPhone home button is covered ...

Why iPhone 6S doesn't boot successfully after pressing the power button? We tried recharge and replace the screen and battery, but the iPhone 6S still doesn't boot.  This iPhone 6S was dropped before, so we suspected the iPhone logic board is damaged. We need to fix the damaged iPhone logic board, so the iPhone 6S can boot smoothly. Disassemble the iPhone 6S by phone opening tools, remove the iPhone display assembly, disconnect the iPhone battery, and then remove the iPhone logic board. Measure the iPhone logic board by DPS DC power supply , the iPhone current doesn't display, and the there is no obvious short-circuit phenomenon on the iPhone logic board. Use tweezers to short connect the boot pin to turn on the iPhone 6S, after booting; we can see that the current is larger than normal value, which means there is a short-circuited phenomenon on the iPhone motherboard. We need to find the short-circuit component. Use digital multimeter to measure the diode data f...