Skip to main content

iphone 4-6p remove iCloud lock by replace IC

New way to remove iPhone iCloud ID through replace IC, the new Method for Hardware Unlock iphone icloud ID? What should your forget the iCloud ID’s password on iphone 4-5s? how to change old iphone mode to new someone else, and when lost the original purchase certificate and packaging box about your iphone, is it possible to unlock my iPhone through Replace Hardware IC, and get the new iphone mode without iCloud ID.




NOTE:  Remove Blacklisted, Lost Mode and Clean Mode iCould For iPhone 4-5s (Pre-Programmed Just Replace to your old Phone and its Ready to use)

On the above photo, there are respectively 16GB NAND Flashbaseband and eeprom IC from left to right. Baseband and chip are a whole set, and baseband must work with the IMEI which is stored in chip.
 
In general, what we need to replace are those three components, Nand Flash, baseband and eeprom IC. However, vipprog iphone eeprom IC programmer have cracked the data read/write of iPhone 5S’s chip, now we only need to replace baseband and NAND Flash, then use WL iphone chip IMEI programmer to write the IMEI into the eeprom ic.
 

Let’s see the locations of those three components.

1. Use HOT AIR GUN; to disassemble the NAND Flash.
2. Deal with the ponding pad of NAND Flash, need the BGA Reballing Stencil and UV Solder Resist Mask.
3. Continue to dissemble the baseband.
4. Deal with the ponding pad of baseband.
5. Import the data of new IMEI chip into the original ID panel.
6. Assemble the new NAND and baseband, then use iTunes to flash this iPhone 5S.
7. Now you can boot and activate it, and use it normally.

Comments

Popular posts from this blog

User Manual: JC V1 Programmer to fix iPhone light sensor/vibrator

As we know, the light sensor and vibrator is very important for iPhone screen. If you want to replace the iPhone screen, you also need to transfer the original screen data to the new iPhone screen(iPhone 8 to iPhone Xs Max),so you can make sure the new iPhone screen will work fine. Here is a  JC V1 programmer  to fix iPhone light sensor and vibrator problem (for iPhone 7- iPhone Xs Max), it also can repair iPhone baseband eeprom IC or iPhone logic eeprom IC problem. The JC V1 Programmer comes with 24-inch HD display screen, three-color LED indicator light, two small connecting seats (for connecting function panel) , two buttons and one function panel (including light sensor/touch connector, baseband function connector, vibration connector) It support 2 languages (Chinese/English) and three lines of code (read/write/burn/save), the function panel can be changed, the software can automatically update What’s the functions? - Repair iPhone Light sensor/ true ...

How to install K-TAG 7.003 KTM100 K-Suite 2.13 software

China Clone KTAG 7.003 firmware has newly launched, New2.13 KTM100 software is the replacement of 2.13 K-Suite which brings brand-new interface and makes easier operation. Here, vipprogrammer.com share the installation guide of K-TAG 7.003 K-Suite 2.13 software, this step-by-step instruction guide will help you. Software: KTM100 V2.13 (better than Ksuite software) Firmware: V7.003 Language:  English, Italian, Portuguese NOTE: KTM100 software can only be work with KTAG firmware V7.003 New KATG KTM100 V2.13 Firmware 7.003 new added feature: 1) New add BMW F chassis petrol and Mercedes-Benz W222 models 2) Software is much easier to use and is very stable. After you connect the car, just choose the large type, KTM100 will recognize the ECU detailed type via ID automatically. Disable both local network and wireless connection (Very important!!!) 1) Install KTAG KTM100 V2.13 setup Open KTM100 setup in the CD software on My computer Open KTM100 file, then open KTM100 English file...

Install instructions for 2015.R1 autocom CDP Diagnosis software

2015.R1 autocom cdp software is available, 2015.1 autocom cdp software need to be activated by keygen, here, we share Install instructions for 2015.R1 autocom cdp software, help you how to crack autocom cdp software on you pc Tips: 1.) TURN OFF your internet connection! 2.) Shutdown antivirus software! The tutorial of Installing 2015.R1 autocom cdp Step 1: download autocom cdp software or insert the dvd to your pc. Step 2: pls download upgrade file for 2015.1 autocom cdp software, then copy all file and folder replace to autocom cdp(new vci) install Folder. Instructions for 2014.R1 autocom cdp Diagnosis software Step 3: Run autocom cdp software agian, the Activation menu will be showed, PLS DO IT by activation guide for 2013.R3 autocom cdp software. Step 4: Choose - click “YES” button to save autocom cdp FileActivation file, send this FileActivation.xml file to us (PLS DON’T USING 2013.3 Autocom delphi KEYGEN GET Activation FILE). Instructions for 2015.R1 autocom cdp Diagnosis softwar...