Skip to main content

DIY FIX: iPhone XR camera won't take pictures

The iPhone XR camera won't take pictures, when press the button to take pictures, it doesn't respond, there is no pictures saved, we are going to DIY fix it.




Try to fix by restarting the iPhone XR, but not working; then restore the iPhone XR, the iPhone camera is still not working.

Now we are going to disassemble the iPhone XR. Use phone opening tools to disassemble the iPhone XR, remove the iPhone screen.

Use Fluke 15B+ digital multimeter to measure the resistance value and voltage of the iPhone camera circuit, they all normal.

According to our repair experience, we're going to replace the iPhone Nand flash. Remove the iPhone XR motherboard, attach it to the MJ A22+ PCB fixture, and then use Phonefix 861DW hot air rework station and BGA graver to remove the iPhone Nand flash.

After removing the iPhone XR Nand flash, then put a new iPhone XR Nand flash to the Nand test fixture, connect the device, write down the underlying data to the new iPhone Nand flash, and then unbind the WIFI.

Now we need to install the new iPhone Nand flash to the motherboard. Apply some solder paste to the solder pad, put iPhone Nand flash in the right position, and then use DES H95 5 IN 1 rework station to blow it.

After the motherboard is cooled, use iTunes to restore it, and then connect the iPhone motherboard and iPhone display screen to test the iPhone camera function, now both the iPhone rear camera and front camera can take pictures and store pictures properly, the iPhone camera function is back to normal.

Install the iPhone XR, and boot it, test the other functions on iPhone XR, they all works well.


Comments

Post a Comment

Popular posts from this blog

User Manual: JC V1 Programmer to fix iPhone light sensor/vibrator

As we know, the light sensor and vibrator is very important for iPhone screen. If you want to replace the iPhone screen, you also need to transfer the original screen data to the new iPhone screen(iPhone 8 to iPhone Xs Max),so you can make sure the new iPhone screen will work fine. Here is a  JC V1 programmer  to fix iPhone light sensor and vibrator problem (for iPhone 7- iPhone Xs Max), it also can repair iPhone baseband eeprom IC or iPhone logic eeprom IC problem. The JC V1 Programmer comes with 24-inch HD display screen, three-color LED indicator light, two small connecting seats (for connecting function panel) , two buttons and one function panel (including light sensor/touch connector, baseband function connector, vibration connector) It support 2 languages (Chinese/English) and three lines of code (read/write/burn/save), the function panel can be changed, the software can automatically update What’s the functions? - Repair iPhone Light sensor/ true ...
1 comment
Read more

How to install K-TAG 7.003 KTM100 K-Suite 2.13 software

China Clone KTAG 7.003 firmware has newly launched, New2.13 KTM100 software is the replacement of 2.13 K-Suite which brings brand-new interface and makes easier operation. Here, vipprogrammer.com share the installation guide of K-TAG 7.003 K-Suite 2.13 software, this step-by-step instruction guide will help you. Software: KTM100 V2.13 (better than Ksuite software) Firmware: V7.003 Language:  English, Italian, Portuguese NOTE: KTM100 software can only be work with KTAG firmware V7.003 New KATG KTM100 V2.13 Firmware 7.003 new added feature: 1) New add BMW F chassis petrol and Mercedes-Benz W222 models 2) Software is much easier to use and is very stable. After you connect the car, just choose the large type, KTM100 will recognize the ECU detailed type via ID automatically. Disable both local network and wireless connection (Very important!!!) 1) Install KTAG KTM100 V2.13 setup Open KTM100 setup in the CD software on My computer Open KTM100 file, then open KTM100 English file...
Post a Comment
Read more

Install instructions for 2015.R1 autocom CDP Diagnosis software

2015.R1 autocom cdp software is available, 2015.1 autocom cdp software need to be activated by keygen, here, we share Install instructions for 2015.R1 autocom cdp software, help you how to crack autocom cdp software on you pc Tips: 1.) TURN OFF your internet connection! 2.) Shutdown antivirus software! The tutorial of Installing 2015.R1 autocom cdp Step 1: download autocom cdp software or insert the dvd to your pc. Step 2: pls download upgrade file for 2015.1 autocom cdp software, then copy all file and folder replace to autocom cdp(new vci) install Folder. Instructions for 2014.R1 autocom cdp Diagnosis software Step 3: Run autocom cdp software agian, the Activation menu will be showed, PLS DO IT by activation guide for 2013.R3 autocom cdp software. Step 4: Choose - click “YES” button to save autocom cdp FileActivation file, send this FileActivation.xml file to us (PLS DON’T USING 2013.3 Autocom delphi KEYGEN GET Activation FILE). Instructions for 2015.R1 autocom cdp Diagnosis softwar...
8 comments
Read more