Skip to main content

Here: JC P11 iPhone Nand Test Fixture Specification Details


JC P11 iPhone Nand test fixture is on sale now, some users still confused for it, what's credit points for JC P11? Why it's cheap? As we know, JC P11 BGA110 programmer is the latest programmer for iPhone  iPhone XS Max,XS, X, 8P, 8  and iPhone 11 Pro max/pro/11, which is made by JCID factory.  Here are some  specification details for JC P11 programmer.

1. Main Functions.

- Support to modify and write BGA110 NAND SYSCFG data (NAND Flash underlying data, such as SN/BT/WIFI and others); Unbind WIFI.

- It doesn't require restoring the firmware for brand-new Nand flash, the SYSCFG data can be written directly.

- Repair the Error 35 during firmware restoring for BGA110 NAND

- Repair the DATA Error for BGA110 NAND

- Support iPhone 8/8P/X/XS/XS Max currently, free software upgrade to support 11-11Pro Max in the future

- Initiate the network charging mode, can purchase the points according to the demand, which greatly saves the equipment investment cost.

2. What iPhone models and Nand models can be supported?

-  For iPhone 8/8P/X Nand models

iPhone 8/8P/X Nand models
Hynix Nand
H23Q2T8QK6MES_256G
H23QFG8ND6MDS_64G
Samsung Nand
KLAEG8UWCAE_256G
KLACG2UWCAE_64G
SanDisk Nand
SDMPEGFI8_256G
SDMPEGFI4_128G
SDMPEGFI2_64G
Toshiba Nand
TSB3245/TSB3223_256G
TSB3244_128G
TSB3243/TSB3234_64G
TSBL227_64G

-          For iPhone XR/XS/XSMAX/iPad mini 5/iPad Air 3 Nand models

iPhone XR/XS/XSMAX/iPad mini 5/iPad Air 3 Nand models
Hynix Nand
H23Q4T8QK6MES_512G
H23Q2T8QK6MES_256G
H23QFG8ND6MDS_64G
Samsung Nand
KLAFG8RWCME_512G
KLAFG8UWCME_256G
KLACG2UWCAE_64G
SanDisk Nand
SDMPEGFI8_256G
SDMPEGFI4_128G
SDMPEGFI2_64G
Toshiba Nand
TSB3245/TSB3223_256G
TSB3244_128G
TSB3243/TSB3234_64G

-          iPhone 8/8P/X Nand models that support formatting/recovering firmware

iPhone 8/8P/X Nand models that support formatting/recovering firmware
Hynix Nand
H23Q2T8QK6MES_256G
H23QFG8ND6MDS_64G
Samsung Nand
KLAEG8UWCAE_256G
KLACG2UWCAE_64G
SanDisk Nand
SDMPEGFI8_256G
SDMPEGFI4_128G
SDMPEGFI2_64G
Toshiba Nand
TSB3245/TSB3223_256G
TSB3244_128G
TSB3243/TSB3234_64G
TSBL227_64G

-          iPhone XR/XS/XSMax/iPad mini 5/iPad Air 3 Nand models that support formatting/recovering firmware

iPhone XR/XS/XSMax/iPad mini 5/iPad Air 3 Nand models that support formatting/recovering firmware
Hynix Nand
H23Q4T8QK6MES_512G
H23Q2T8PG6MDS_256G
H23Q2T8QK6MES_256G
H23QFG8ND6MDS_64G
Samsung Nand
KLAFG8RWCME_512G
KLAFG8UWCME_256G
KLACG2UWCAE_64G
SanDisk Nand
SDMPEGFI8_256G
SDMPEGFI4_128G
SDMPEGFI2_64G
Toshiba Nand
TSB3245/TSB3223_256G
TSB3244_128G
TSB3243/TSB3234_64G

-          For iPhone 11/ iPhone 11 Pro/ iPhone 11 Pro Max, they will be supported in the future (2020)

3. JC P11 Nand test fixture Size

Brand
P/N
Material
N.W.
Size
Support

JCID
BAG11 PROGRAMMER- P11

Aluminum Alloy

110.56g

105*66*11mm

8-Xs Max

4. How to modify SYSCFG data (Nand underlying data)

-          Login to the JC Repair Assistant (software), press “BGA110”, then connect the iPhone to the computer, press “Obtain” to temporarily save the data to the JC Repair Assistant (the data will be deleted once you close the JC repair Assistant). Users can check SYSCFG data that have been saved on PC before by pressing “Open SYSCFG”.

-          Connect P11 to JC Repair Assistant, install driver, there will be noticed when “connected”

-          Put a new Nand flash on JC P11, choose “Unbind WIFI”, modify the information as needed, press “Modify & Confirm”, and press “Generate data”. During this operation, it requires credit points, there will be a tips column to notice for points deduction, press “yes”, then the data will be encrypted by the third-party AL server, and then write to the new Nand flash. 5 Points per time for now.

-          After operation, assemble the Nand flash to the motherboard to restore the firmware.

5. How to format/restore firmware freely?


-          Login to the JC Repair Assistant, press “BGA110”, connect JC P11 to the Assistant, install the driver, the Assistant will notice when the connection is successful.
-          Put the Nand flash that will need to format or restore the firmware on JC P11, choose required models, press “Format Disk” to fulfill the operation


6. About the credit points for JC P11

-          To generate encrypted data need to adopt the third-party AI Cloud service, so the corresponding Points will be deducted after information writes, for iPhone 8-XS Max models, each operation is 5 points.

-          JC P11 will comes with 300 points, once these points have been used up, you can contact the seller to top up (recharge the credit points)



Labels:

Comments

Post a Comment

Popular posts from this blog

User Manual: JC V1 Programmer to fix iPhone light sensor/vibrator

As we know, the light sensor and vibrator is very important for iPhone screen. If you want to replace the iPhone screen, you also need to transfer the original screen data to the new iPhone screen(iPhone 8 to iPhone Xs Max),so you can make sure the new iPhone screen will work fine. Here is a  JC V1 programmer  to fix iPhone light sensor and vibrator problem (for iPhone 7- iPhone Xs Max), it also can repair iPhone baseband eeprom IC or iPhone logic eeprom IC problem. The JC V1 Programmer comes with 24-inch HD display screen, three-color LED indicator light, two small connecting seats (for connecting function panel) , two buttons and one function panel (including light sensor/touch connector, baseband function connector, vibration connector) It support 2 languages (Chinese/English) and three lines of code (read/write/burn/save), the function panel can be changed, the software can automatically update What’s the functions? - Repair iPhone Light sensor/ true ...
1 comment
Read more

How to install K-TAG 7.003 KTM100 K-Suite 2.13 software

China Clone KTAG 7.003 firmware has newly launched, New2.13 KTM100 software is the replacement of 2.13 K-Suite which brings brand-new interface and makes easier operation. Here, vipprogrammer.com share the installation guide of K-TAG 7.003 K-Suite 2.13 software, this step-by-step instruction guide will help you. Software: KTM100 V2.13 (better than Ksuite software) Firmware: V7.003 Language:  English, Italian, Portuguese NOTE: KTM100 software can only be work with KTAG firmware V7.003 New KATG KTM100 V2.13 Firmware 7.003 new added feature: 1) New add BMW F chassis petrol and Mercedes-Benz W222 models 2) Software is much easier to use and is very stable. After you connect the car, just choose the large type, KTM100 will recognize the ECU detailed type via ID automatically. Disable both local network and wireless connection (Very important!!!) 1) Install KTAG KTM100 V2.13 setup Open KTM100 setup in the CD software on My computer Open KTM100 file, then open KTM100 English file...
Post a Comment
Read more

Install instructions for 2015.R1 autocom CDP Diagnosis software

2015.R1 autocom cdp software is available, 2015.1 autocom cdp software need to be activated by keygen, here, we share Install instructions for 2015.R1 autocom cdp software, help you how to crack autocom cdp software on you pc Tips: 1.) TURN OFF your internet connection! 2.) Shutdown antivirus software! The tutorial of Installing 2015.R1 autocom cdp Step 1: download autocom cdp software or insert the dvd to your pc. Step 2: pls download upgrade file for 2015.1 autocom cdp software, then copy all file and folder replace to autocom cdp(new vci) install Folder. Instructions for 2014.R1 autocom cdp Diagnosis software Step 3: Run autocom cdp software agian, the Activation menu will be showed, PLS DO IT by activation guide for 2013.R3 autocom cdp software. Step 4: Choose - click “YES” button to save autocom cdp FileActivation file, send this FileActivation.xml file to us (PLS DON’T USING 2013.3 Autocom delphi KEYGEN GET Activation FILE). Instructions for 2015.R1 autocom cdp Diagnosis softwar...
8 comments
Read more