Skip to main content

Clone Kess v2 firmware V4.036 K-suite 2.11 Unlimited tokens

Clone kess v2 new release, KESS V2 with K-suite 2.11 and Firmware V4.036, our kess v2 hardware is No token limitation. You can use it to program ECUs all the time. No need program token chips anymore, Kess v2 firmware V4.036 Add more latest protocols and ECUs, more detailed cable connection instruction.
K-suite 2.11 Kess V2 with V4.036 firmware - no token limitation

Attention: DO NOT connect Internet when you install or use this software. Firmware will be damaged by this. Once connect to internet, it may damage the hardware and can not repair in your side, you must send back to us for repair.

Why choose KESS V2 V4.036 firmware:

1) New software and New firmware release
Software: V2.11, firmware: V4.036
2) Unlimited tokens version, NO NEED program tokens chip anymore. Just use it all the time. User friendly.

3) More ECUs and protocols are opened on software. Work on more vehicles freely.

4) multi-languages: English, German, Spanish, Italian, Portuguese, French

5) Supported system: Most XP and WIN7

This software can be used on most XP and win 7 system. But if your laptop has other similar software which is not compatible with kess K-suite software, please change the laptop or system to install. Or you can change to use our XP system.

Kess V2 has several built in features and safeguards including:

1. Check of the battery voltage in real-time
2. Full Recovery function in case of problems
3. Automatic correction of the Checksum, (where available)
4 Boot-Loader mode supported
5. Management of the programming counters
6. ScanTool function to remove DTC
7. Several options of reading/writing speed
8. Option to write full file/section of the map
9. Full integration with ECM Titanium

what do you know when using china KESS V2:

1) DO NOT USE internet, DO NOT USE anti-virus software
2) After you connect internet, CPU will be damaged. This version CPU cannot be flashed. So you need to send it back to us to fix.
3) Install the software as our KESS V2 V2.11 software installation video STEP BY STEP. Otherwise you may get error, maybe software will not display normally, maybe software cannot go on.
KESS V2 Supported Vehicle List:
www.auto-tool-shop.com/docs/kess-v2-obd2-tuning-kit-vehicle-list.xls

Kess v2 full support car list:
http://pan.baidu.com/s/1pJLY62R

Clone Kess v2 Firmware Update service,

If your Kess V2 Firmware version V3.09 or lower, you can return the main unit to us for update to Kess V2 4.036.
But please make sure only kess QC label is ended with A015 can be updated now.

Comments

Post a Comment

Popular posts from this blog

Complete Guide to Replacing Your iPhone Battery at Home

  Has your iPhone battery started showing the dreaded signs of age, like frequent charging, rapid draining, or even an untimely shutdown? Are you considering a battery replacement but feeling deterred by the potential cost or hassle of a trip to the Apple Store? Don't worry; with the right guidance, you can replace your iPhone battery at home quickly and safely, sparing your wallet and ensuring a future of longer charge cycles for your beloved device. Whether you have the latest model or an older version, we'll walk you through the process step by step. But before we get into the nitty-gritty, here's why a battery replacement might be in your best interest. Why You Should Replace Your iPhone Battery The lithium-ion batteries in our smartphones are not immortal. They degrade over time due to a variety of factors, such as age, temperature, and the number of charge cycles. Replacing an old battery can provide several benefits: Improved Performance: A new battery can result ...
Post a Comment
Read more

User Manual: JC V1 Programmer to fix iPhone light sensor/vibrator

As we know, the light sensor and vibrator is very important for iPhone screen. If you want to replace the iPhone screen, you also need to transfer the original screen data to the new iPhone screen(iPhone 8 to iPhone Xs Max),so you can make sure the new iPhone screen will work fine. Here is a  JC V1 programmer  to fix iPhone light sensor and vibrator problem (for iPhone 7- iPhone Xs Max), it also can repair iPhone baseband eeprom IC or iPhone logic eeprom IC problem. The JC V1 Programmer comes with 24-inch HD display screen, three-color LED indicator light, two small connecting seats (for connecting function panel) , two buttons and one function panel (including light sensor/touch connector, baseband function connector, vibration connector) It support 2 languages (Chinese/English) and three lines of code (read/write/burn/save), the function panel can be changed, the software can automatically update What’s the functions? - Repair iPhone Light sensor/ true ...
1 comment
Read more

Here: JC P11 iPhone Nand Test Fixture Specification Details

JC P11 iPhone Nand test fixture is on sale now, some users still confused for it, what's credit points for JC P11? Why it's cheap? As we know, JC P11 BGA110 programmer is the latest programmer for iPhone   iPhone XS Max,XS, X, 8P, 8  and iPhone 11 Pro max/pro/11, which is made by JCID factory.  Here are some  specification details for JC P11 programmer . 1. Main Functions. - Support to modify and write BGA110 NAND SYSCFG data (NAND Flash underlying data, such as SN/BT/WIFI and others); Unbind WIFI. - It doesn't require restoring the firmware for brand-new Nand flash, the SYSCFG data can be written directly. - Repair the Error 35 during firmware restoring for BGA110 NAND - Repair the DATA Error for BGA110 NAND - Support iPhone 8/8P/X/XS/XS Max currently, free software upgrade to support 11-11Pro Max in the future - Initiate the network charging mode, can purchase the points according to the demand, which greatly saves the equipmen...
Post a Comment
Read more