Skip to main content

Fix "Unknown Part" Message after Replacing iPhone Rear Camera - 100%

 If you've recently replaced the rear camera on your iPhone 14 Pro Max and encountered an annoying "Unknown Part" message, fret not! In this guide, PHONEFIX'll walk you through a solder-free method to fix this issue. Whether you've upgraded to iOS 14.4 or are facing the error on models ranging from iPhone 12 to iPhone 14 Pro Max, we've got you covered.  -- https://www.diyfixtool.com/

Tools Required

  • JC V1S Pro
  • Rear Camera Repair Adaptor
  • JC Tag-On Rear Camera Repair Flex Cable

Watch the Operation Tutorial

Step-by-Step Instructions

STEP 1: PREPARATION AND CONNECTION

  1. Ensure that the JC V1S Pro programmer is adequately powered before proceeding.
  2. Adjust the automatic shutdown time settings on the JC V1S Pro to an appropriate duration.
  3. Keep the JC V1S Pro connected to the internet throughout the process.
  4. Connect your iPhone to the JC V1S Pro using a USB cable and establish a stable connection.

STEP 2: WORKING WITH AN ORIGINAL CAMERA WHOSE DATA CAN BE READ

  1. Attach the removed original iPhone 14 Pro Max rear camera to the corresponding port of the rear camera repair adaptor on the JC V1S Pro.
  2. Click on "Detect&Read" to initiate the camera data reading process. If successful, the message "Camera data read success" will be displayed.
  3. Click on "Cloud Unbind" to back up the data. You will see a confirmation message stating "Data backup succeeded."
  4. Safely remove the iPhone 14 Pro Max original camera from the adaptor.

STEP 3: INSTALLING THE REPAIR FLEX CABLE


Follow the video to correctly install the JC Tag-On Rear Camera Repair Flex Cable.

STEP 4: CLOUD DATA BURNING

  1. Attach the iPhone 14 Pro Max camera with the JC Tag-On Rear Camera Repair Flex Cable to the corresponding port of the rear camera repair adaptor on the JC V1S Pro.
  2. Click on "Detect&Read" to identify the FPC (Flex Printed Circuit) information.
  3. Click on "Cloud Burn" to initiate the data burning process. By default, the cloud data will be named based on the timestamp. Select the data to be written and click "Select."
  4. Click "OK" to start writing the selected data. Once completed, a "Write success" message will be displayed.
  5. Remove the camera from the adaptor and install it back into the iPhone for further testing.

STEP 5: WORKING WITH AN ORIGINAL CAMERA WHOSE DATA CAN'T BE READ

If you are unable to read the data from the iPhone 14 Pro Max original camera, you can initiate the unbinding process by scanning a QR code.
  1. Click on "Scan Bind" and use another mobile phone to scan the QR code generated by the JC V1S Pro.
  2. On the unbinding page, click "Start" and scan the QR code located on the back of the original camera.
  3. Once the unbinding process is complete, a message stating "Unbind successfully, data has been backed up to the cloud" will be displayed.
  4. Obtain a new camera and install the JC Tag-On Rear Camera Repair Flex Cable to proceed with the data burning process.

This method eliminates the need for soldering and ensures a successful camera replacement without any software issues. Remember to exercise caution and ensure a stable connection throughout the process.

Conclusion

By following these iPhone 14 Pro Max step-by-step repair instructions using the JC V1S Pro programmer and the necessary repair adaptors and flex cables, you can resolve the "Unknown Part" error that may occur after replacing the rear camera on all model from iPhone 12 to iPhone 14 Pro Max. 

Additional Solutions

In addition to the method described above, there are alternative solutions available to tackle the "Unknown Part" error on iPhone models ranging from iPhone 12 to iPhone 14 Pro Max. These solutions involve utilizing different camera repair cables, such as:At PHONEFIX, we're committed to providing you with the best tools and solutions to address your mobile phone repair needs effectively.

Comments

Post a Comment

Popular posts from this blog

Complete Guide to Replacing Your iPhone Battery at Home

  Has your iPhone battery started showing the dreaded signs of age, like frequent charging, rapid draining, or even an untimely shutdown? Are you considering a battery replacement but feeling deterred by the potential cost or hassle of a trip to the Apple Store? Don't worry; with the right guidance, you can replace your iPhone battery at home quickly and safely, sparing your wallet and ensuring a future of longer charge cycles for your beloved device. Whether you have the latest model or an older version, we'll walk you through the process step by step. But before we get into the nitty-gritty, here's why a battery replacement might be in your best interest. Why You Should Replace Your iPhone Battery The lithium-ion batteries in our smartphones are not immortal. They degrade over time due to a variety of factors, such as age, temperature, and the number of charge cycles. Replacing an old battery can provide several benefits: Improved Performance: A new battery can result ...
Post a Comment
Read more

User Manual: JC V1 Programmer to fix iPhone light sensor/vibrator

As we know, the light sensor and vibrator is very important for iPhone screen. If you want to replace the iPhone screen, you also need to transfer the original screen data to the new iPhone screen(iPhone 8 to iPhone Xs Max),so you can make sure the new iPhone screen will work fine. Here is a  JC V1 programmer  to fix iPhone light sensor and vibrator problem (for iPhone 7- iPhone Xs Max), it also can repair iPhone baseband eeprom IC or iPhone logic eeprom IC problem. The JC V1 Programmer comes with 24-inch HD display screen, three-color LED indicator light, two small connecting seats (for connecting function panel) , two buttons and one function panel (including light sensor/touch connector, baseband function connector, vibration connector) It support 2 languages (Chinese/English) and three lines of code (read/write/burn/save), the function panel can be changed, the software can automatically update What’s the functions? - Repair iPhone Light sensor/ true ...
1 comment
Read more

Here: JC P11 iPhone Nand Test Fixture Specification Details

JC P11 iPhone Nand test fixture is on sale now, some users still confused for it, what's credit points for JC P11? Why it's cheap? As we know, JC P11 BGA110 programmer is the latest programmer for iPhone   iPhone XS Max,XS, X, 8P, 8  and iPhone 11 Pro max/pro/11, which is made by JCID factory.  Here are some  specification details for JC P11 programmer . 1. Main Functions. - Support to modify and write BGA110 NAND SYSCFG data (NAND Flash underlying data, such as SN/BT/WIFI and others); Unbind WIFI. - It doesn't require restoring the firmware for brand-new Nand flash, the SYSCFG data can be written directly. - Repair the Error 35 during firmware restoring for BGA110 NAND - Repair the DATA Error for BGA110 NAND - Support iPhone 8/8P/X/XS/XS Max currently, free software upgrade to support 11-11Pro Max in the future - Initiate the network charging mode, can purchase the points according to the demand, which greatly saves the equipmen...
Post a Comment
Read more