Life is like a box of chocolates, you never
know what you're gonna get. It's the same with repair phone, accidentally, you
might screw it up. Here is the case. A friend want to fix a iPhone 6, but
accidentally the screw hole was penetrated, then he made up wires, but it is
not working. Now, Vipprog will tell you how to fix
it.
1. Disassemble the iPhone by phone opening tools, then cleaning the screw hole, we
found that the two circuits under it are cut into two parts. This situation
cannot be settled by scratching PCB to make up lines but to jump wires. We have to use green oil to
solidify the jump wires.
2. Finally, we need to paint all the area
with added lines green oil. Then we turn
iPhone on and test it, all the function can back to normal work.
Tips:
1. As many of you do not pay attention to
the strength that you use to twist the screws, the screw holes are often
twisted through.
2. Usually, although we can scratch PCB to
make up lines wires and fix it well, we cannot to twist the screw. Fortunately,
in this case, a missing screw will not affect the stability of motherboard as
well as the usage of iPhone.
Comments
Post a Comment